Canon LX-P5510 User Manual Download Page 110

Page: 110 / 285

106

Chapter 3 How to Use the Printer Driver

Placing the Printer in Sleep Mode

Important

• When printing is in progress or an error has occurred, the printer cannot be switched to sleep mode.

• The printer enters sleep mode automatically when it has been left idle for a certain period of time

under normal operating conditions.

Note

• By default, the sleep timer is set to 4 minutes.

• The printer is automatically switched back from sleep mode to online in the following cases:

– When the Power key is pressed.

– When print data is received.

– When cleaning, etc. is performed.

Make sure the printer is online. (the status lamp is lit.)

Open the printer driver setup window.

(

→

P.40)

Summary of Contents for LX-P5510






























































































































































































































































































Search results

Summary of Contents for LX-P5510

Reviews:

Related manuals for LX-P5510

Brands by name

Popular brands

Canon LX-P5510, User Manual

Search results

Summary of Contents for LX-P5510

Reviews:

Related manuals for LX-P5510

Brands by name

Popular brands