Canon LX-P1300 User Manual Download Page 8

Page: 8 / 210

Chapter 1 Basic Operation

Names and Functions of Components

Names and functions of the components of this printer are described below.

External View

Transport Unit

(P.4)

Pull out this unit when setting paper.

Ejection Slot

Printed paper is ejected through this slot.

Operation Panel

(P.5)

Keys for selecting printer operations and lamps
indicating printer statuses are provided on this panel.

Ink Tank Cover

Open this cover when replacing ink tanks.

USB Connector

Connect a USB cable to this connector.

LAN Connector

Connect a LAN cable to this connector.

Power Socket

Connect the supplied AC adapter to this socket.

Rating Plate Label

A serial number for identifying the printer is shown on
this plate.
(The serial number is required when you contact
customer support or require any sort of printer repairs.)

IMPORTANT

• While the printer is operating, do not open the ink tank cover or the transport unit lever. IIt could cause a printer failure.

Summary of Contents for LX-P1300



















































































































































































































Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands

Canon LX-P1300, User Manual

Search results

Summary of Contents for LX-P1300

Reviews:

Related manuals for LX-P1300

Brands by name

Popular brands