22
Chapter 1 Basic Operation
8
Set paper.
1. Pass the paper leading edge under the
sensor (C), and align it with the paper
alignment line (D).
Check that paper does not float above the
paper guides (A and E).
If it is hard to feed paper in, check whether the
paper guide is positioned properly.
IMPORTANT
• If there is a large slack in the paper roll, remove the roll and tighten the paper. Paper with a large slack may touch
the paper set lever, causing the printer to malfunction.
9
Fix paper.
1. Hold the paper set lever as shown in the
figure.
2. Press the rollers (F) onto the paper
surface.
D
E
C
A
F
