Canon LV-WX300UST User Manual Download Page 40

Page: 40 / 75

—

Video Menu

Press the

MENU

button to open the

OSD

menu. Press the cursor ◄► button to move to the

Video

menu. Press the cursor ▲▼ button to move up and down in the

Video

menu. Press ◄► to change

values for settings.

TEM

ESCRIPTION

Video AGC

Press the ◄► buttons to enable or disable the Automatic Gain Control for video
source.

Video Saturation

Press

the ◄► buttons to adjust the video saturation.

Video Tint

Press the ◄► buttons to adjust the video tint/hue.

Film Mode

Press the ◄► buttons to select a different film mode.

Video Overscan

Press the ◄► buttons to enable or disable video over scan.

Closed Captioning

Press the ◄► buttons to enable or disable closed captioning.

Audio

Press OK /

► to enter the Audio menu. See

Audio

on page

Reset

Press OK

/ ► to reset all settings to default values.

Note:

Video jagging may occur when playing interlace video. To overcome this issue, open the
Video menu and adjust the Film Mode feature.

Summary of Contents for LV-WX300UST












































































Search results

Summary of Contents for LV-WX300UST

Reviews:

Related manuals for LV-WX300UST

Brands by name

Popular brands

Canon LV-WX300UST, User Manual

Search results

Summary of Contents for LV-WX300UST

Reviews:

Related manuals for LV-WX300UST

Brands by name

Popular brands