CompactFlash Card
LV-WN03
This CompactFlash Card is to be used only with our Multi Card Imager. Using the product with any other
devices is not guaranteed. Use it correctly after take a close look at the following handling instructions. For
details about handling, refer to the owner's manual of the device below
This CompactFlash Card comes with the CompactFlash Card adapter. Use it with the card slot Type-II of your
computer.
Compatible Multi Card Imager: LV-MI01
●
CF Cards / Adapters are precision electronic devices. Do not bend, drop, apply strong forces or shock or
place it where static electricity is easily built up.
●
Do not touch the surface of the contact area with your fingers or allow it to be stained with foreign mate-
rials.
●
Do not attempt to dismantle or alter CF Cards.
●
Rapid movement of CF Card between hot and cold conditions may cause condensation and result in
damage of the product. To avoid this problem, seal the CF Card closely with a plastic bag to let it take to
the room temparature before using it. If condensation should occur, place the CF Card at a constant tem-
perature and let the moisture evaporate naturally.
●
Store CF Cards / Adapters in the exclusive case.
●
Do not use or store CF Cards / Adapters in places subject to the following conditions:
• strong magnetic fields
• abundant dirt or dust
• high temperatures, high humidity
Environment of CF Card / Adapter operation
Operating Temperature
: 41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)
Storage Temperature
: 14 ˚F ~ 140 ˚F (–10 ˚C ~ 60 ˚C)
Attach CF Card
Insert the CF Card firmly into the CF Card Adapter,
aligning the arrows on the CF Card and the
adapter.
Remove CF Card
Pull the CF Card straight out.
Insert the CF Card aligning the arrows.
CF Card
CF Card Adapter
■
CompactFlash Card Adapter (Compatible with PC card slot Type-II)
NOTE ; This adapter cannot be used for other memory cards.
The specifications are subject to change without notice.
■
CompactFlash Card (Comforming to ATA standard) (32MB)
CAUTIONS
Use CF Card Adapter
Specifications
— 1 —
