–
47
–
Advanced 1 Feature
Press the
Menu
button to open the
OSD
menu. Press ◄► to move to the
Settings 2
menu. Press
▲▼ to move to the
Advanced 1
menu and then press
Enter
or ►. Press ▲▼ to move up and down
in the
Advanced 1
menu. Press ◄► to enter and change values for setting.
I
TEM
D
ESCRIPTION
Menu Position
Press
the cursor
◄► button to enter and select different OSD location.
Translucent Menu
Press
the cursor
◄► button to enter and select OSD background translucent level.
Standby Power
Press
the cursor
◄► button to select the operation state during the standby mode.
Full standby: Both network and RS-232 functions are enabled.
RS-232: The RS-232 function is enabled. The network function is disabled. Network:
The network function is enabled. The RS-232 function is disabled.
Fan Speed
Press the cursor ◄► button to enter and toggle between Normal and High fan
speeds.
Note
: We recommend selecting high speed in high altitude (1,500m/4,921' or higher)
areas.
Lamp Hour Reset
After replacing the lamp, the Lamp Hour should be reset. See page
Projector ID
Press the cursor ◄► button to enter and adjust a two digit projector ID from 0 through
98.
Network
Press
(Enter) / ► to enter the Network menu. See page
Note:
About “
Network
”: Standby state that can use a network with under 2W.