manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 96

4-13

Loading and Outputting P

aper

4

Paper Source

PAPER SOURCE is displayed in the display.

2

Select PAPER SOURCE using [

] and [

], then press [OK].

3

Select the paper source using [

] and [

], then press [OK].

NOTE

•

CASSETTE 2 is displayed only when the paper feeder is installed.

•

If paper of the same size is loaded in two or more paper sources when the paper 
source setting is specified to be selected automatically, paper is fed from the upper 
paper source regardless of the status of the 

 (Paper Source) indicators. When 

the paper source runs out of paper, the paper source automatically switches to 
other one in which paper of the same size is loaded.

Precautions for Handling the Manual Feed Slot or Paper 
Cassette

Be careful of the following points when handling the manual feed slot or paper 
cassette.

IMPORTANT

•

Be sure to turn the printer ON once when loading paper in the paper cassette for the first 
time after installing the paper feeder.

•

When any paper is in the manual feed slot, you cannot feed paper from the paper 
cassette. If you are printing from the paper cassette, remove any paper loaded in the 
manual feed slot.

•

Do not pull out the paper cassette while the printer is printing. This may result in paper 
jams or damage to the printer.

•

Do not touch the paper in the manual feed slot or pull it out during printing. This may 
result in a faulty operation.

•

Refill the paper cassette after all the loaded paper runs out. If the cassette is refilled 
when paper still remains in the cassette, it may result in misfeeds.

•

Do not load paper in the manual feed slot during printing from the paper cassette. This 
may result in multiple sheets of paper fed at once or paper jams.

PAPER SOURCE   

→

=AUTO          

→

 CASSETTE 1    

→

=CASSETTE 1    

→

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands