3-8
Canceling a Job
Using the Pr
inter
3
IMPORTANT
You cannot operate the printer while <03 CANCELING JOB> is displayed.
Canceling the Process Currently Being Performed (Soft
Reset)
If you want to cancel the process currently being performed, perform [Soft Reset]
using the following procedure. A soft reset deletes the print data received by all the
interfaces, the job being processed, and the print data in the printer memory.
IMPORTANT
•
Be sure to operate the printer from the computer to cancel printing before canceling the
job from the printer (Soft Reset).
•
When a soft reset is performed, the data being printed and the data being received by all
the interfaces is deleted. Therefore, perform printing from the computer again as needed.
•
The data that has been already sent to the memory are all deleted even if it is the data of
other interface. If you are using the printer on a network, be careful so this operation
does not affect the data from other computers when performing this procedure.
NOTE
Hard resets delete all the registered files such as the form data saved in the RAM of the
printer, but soft resets do not delete them.
1
Press the
(Reset) key.
The RESET menu is displayed.
2
Select SOFT RESET using [
] and [
], then press [OK].
Holding down the [OK] key 3 seconds or more is the operation for HARD RESET.
When <03 SOFT RESET> disappears, the soft reset is completed.
RESET
SOFT RESET
→
SOFT RESET
→
03 SOFT RESET
Summary of Contents for lpb3360
Page 2: ...LBP3360 Laser Printer User s Guide Downloaded from ManualsPrinter com Manuals ...
Page 25: ...xxii Downloaded from ManualsPrinter com Manuals ...
Page 83: ...3 10 Canceling a Job Using the Printer 3 Downloaded from ManualsPrinter com Manuals ...
Page 337: ...Index 10 40 Appendix 10 Downloaded from ManualsPrinter com Manuals ...
