manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 77

3-4

Online and Offline

Using the Pr

inter

3

Online and Offline

When the printer can receive data from the computer and print the data, the printer 
is in the state of "Online", and when the printer is disconnected with the computer 
and cannot receive data, the printer is in the state of "Offline".

To perform the settings for each menu using the control panel, switch the printer 
status as follows:

O: The status that you can enter the menu

X: The status that you cannot enter the menu

*  The USER MAIN. options cannot be specified when the printer is online.

 

Placing the Printer Online

When printing from the computer, the printer has to be online. Before printing, make 
sure that the printer is online. If not, place the printer online using the following 
procedure. The printer comes online automatically after you turn it ON.

1

Press the 

 (Online) key.

The 

 (Online) indicator comes on, and the printer is ready to print.

IMPORTANT

When an error is occurring in the printer (when the 

 (Message) indicator is on, 

or the number in the message blinks), the printer does not come online. Eliminate 
the cause of the error before you place the printer online.

When the printer is 

online

When the printer is 

offline

SETUP Menu

*

SELECT FEEDER Menu

RESET Menu

JOB Menu

x

UTILITY Menu

x

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands