manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 71

Turning the Printer ON and Checking the Printer Operation

2-34

Installing the Pr

inter

2

4

Select the display language using [

] and [

], then press 

[OK].

The display language is changed.

Turning the Printer OFF

Turn the printer OFF using the following procedure.

IMPORTANT

•

If the printer is connected to a network, make sure that other computers are not sending 
print data to the printer before turning the printer OFF.

•

If you turn the printer OFF when the 

 (Job) indicator is on, all the print data remaining 

in the printer memory will be erased. If there is any necessary print data remaining in the 
printer, wait until it is output, or press the 

 (Reset) key in the offline state and then 

select FORM FEED to output the data before turning the printer OFF.

•

Do not turn the power OFF when the printer is in any of the following status:
- During printing
- While the printer is running a self-diagnostic test immediately after turning the power 

ON

- While a message informing you that the NVRAM is being initialized or being written is 

displayed

- While the message <02 WARMING UP> is displayed

 FRENCH        

→

=FRENCH        

→

PANNEAU LANGUES

→

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands