manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 65

2-28

Installing the Pr

inter

2

Turning the Printer ON and Checking the Printer Operation

Turning the Printer ON and Checking the Printer 
Operation

This section describes the procedures for turning the printer ON and checking the 
printer operation.

Turning the Printer ON

IMPORTANT

•

Do not turn the power ON immediately after turning it OFF. If you want to turn the printer 
ON again after turning it OFF, wait at least 10 seconds after turning the printer OFF 
before turning it ON again.

•

If the printer does not operate properly or an error message appears, see "When the 
Printer Does Not Operate Properly," on p. 2-32.

•

When turning the power ON, make sure that no paper is loaded in the manual feed slot. If 
the power is turned ON when any paper is loaded in the manual feed slot, this may result 
in paper jams.

•

Be sure to set the paper cassette in the printer before you turn the power ON for the first 
time after you install the printer.

•

Although a sheet of blank paper is output when you turn the power ON for the first time 
after you install the printer, this is not an error.

1

Press " " of the power switch to turn the printer ON.

The indicators and display on the control panel come on, and the printer initiates 
a self-diagnostic test on the printer unit and optional accessories.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands