manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 31

1-6

Bef

ore Y

ou 

Star

t

1

Parts and Their Functions

Parts and Their Functions

This printer consists of components that perform various functions. This section 
describes the name and function of each part in order for you to use this printer 
properly to make full use of its functions.

 

Printer

The following are the parts and functions of the printer unit.

CAUTION

Never block the ventilation slots on the printer. The ventilation slots are 
provided for proper ventilation of working parts inside the printer. Blocking the 
ventilation slots can cause the printer to overheat, resulting in a fire.

Front View

The following are the parts on the front side of the printer and their functions.

NOTE

Remove the film attached to the control panel before using the panel.

a

a

a

a

Face-down Output Tray

Outputs paper with the printed side facing down. 
(See p. 4-15)

b

b

b

b

Control Panel

Displays the printer status and allows you to specify 
the settings. (See p. 1-9)

d

e

c

b

a

f

g

i

h

j

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands