manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 287

Installing the Paper Feeder

9-2

Installing the Optional Accessor

ies

9

Installing the Paper Feeder

The paper feeder is to be installed at the bottom of the printer unit.

WARNING

Be sure to turn the printer OFF, unplug the power plug, and then disconnect all 
the interface cables and power cord from the printer before installing the paper 
feeder. Otherwise, the power cord or interface cables may be damaged, 
resulting in a fire or electrical shock.

IMPORTANT

•

Do not touch the connector (A) in the paper feeder. This may result in damage to the 
printer or misfeeds.

•

If you are printing from Cassette 2, make sure that Cassette 1 is installed before printing. 
If you print from Cassette 2 when Cassette 1 is not installed, this will cause paper jams.

Removing the Packing Materials

The paper feeder is provided with tape and a packing material to be protected from 
excessive vibrations and shocks during delivery. Remove the tape and packing 
material before installing the paper feeder on the printer.

IMPORTANT

•

If there is any packing material remaining inside the paper feeder, this may result in 
misfeeds or damage to the printer when operating the printer. Be sure to remove all the 
packing materials following the procedure.

•

The removed packing materials are required when transporting the printer for relocation 
or maintenance. Keep them where they will not get lost.

(A)

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands