manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 198

6-43

SELECT FEEDER Menu Settings

6

Pr

inting En

vironment Settings

SELECT FEEDER Menu Settings

PAPER SOURCE

AUTO*, CASSETTE 1, CASSETTE 2*

1

, MANU.FEED SLOT

*1 CASSETTE 2 is displayed only when the optional paper feeder is installed.

Selects the paper cassette or manual feed slot from which the printer feed paper. 
After a paper source is selected, the corresponding 

 (Paper Source) indicator 

comes on.

IMPORTANT

When any paper is in the manual feed slot, you cannot feed paper from the paper 
cassette. If you are printing from the paper cassette, remove any paper loaded in 
the manual feed slot.

NOTE

•

The installed paper cassettes and manual feed slot usually become the target 
paper source when the printer feeds paper automatically. However, you can except 
them from the target paper source.

•

If paper of the same size is loaded in 2 or more paper sources when the paper 
source setting is specified to be selected automatically, paper is fed from the upper 
paper source regardless of the status of the 

 (Paper Source) indicators. When 

the paper source runs out of paper, the paper source switches to other one in 
which paper of the same size is loaded.

•

If INVLDPAPER SLOT (See p. 6-16) is set to ON, the setting for this item is 
ignored, and the printer feeds paper from the manual feed slot when paper that is 
the same size as the paper size of the received data is not loaded in the selected 
paper source.

•

When feeding paper from the manual feed slot, you need to specify the size of the 
loaded paper previously. The default value is "A4".

Cassette 1

Cassette2*

Manual feed slot

*Optional

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands