manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 180

 

6-25

 

Pr

inting En

vironment Settings

 

6

 

SETUP Menu Settings

 

QUALITY CHANGE

 

CONT.PRINTING*, STOP PRINTING

Specifies whether the printer should continue printing with the image quality level 
being lowered automatically or stop printing, displaying the following error 
message when the memory required for the process runs out.

If CONT.PRINTING is specified, the printer prints with the image quality level 
being lowered automatically without displaying a message.

If STOP PRINTING is specified, the printer stops printing, displaying a message. 
In this case, the printer resumes printing with the image quality level being 
lowered by pressing the 

 (Online) key.

NOTE

 

When the message <38 LOW IMGE QLTY> appears frequently by specifying 
STOP PRINTING for this item, perform the following procedure.
- If GRADATION LEVEL is set to HIGH, set it to STANDARD. If you do so, however, 

the printer prints with the gradation level of the data being lowered.

 

INTERFACE MENU Options

 

I/F CONNECTION

 

USB ......................................ON*, OFF

 

NETWORK ...........................ON*, OFF

Specifies the settings for the interfaces used for communication with the 
computer, etc.

You can specify ON or OFF for each interface.

Even if multiple interfaces are set to ON, the printer automatically switches to the 
one that received the data first. Therefore, you do not need to change the setting 
in the printer each time you connect the printer to different types of interfaces at 
the same time.

IMPORTANT

 

After changing the settings for this item, cycle the power of the printer or perform a 
hard reset to make the settings effective.

 

Error Message

Setting

 

<38 LOW IMGE QLTY>

When the printer receives a large amount of data or 
complicated data, the memory required for the 
process may run out, and the printer may print with 
the image quality level being lowered automatically. 
Specify whether the printer should display an error 
message when the printer is in this status.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands