manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 167

6-12

Pr

inting En

vironment Settings

6

SETUP Menu Settings

•

For the types of error from which the printer can be released temporarily, see 
"Message List," on p. 8-27.

•

If ON is specified for this item, the printer automatically skips all the errors it can 
skip automatically even when multiple errors are occurring.

PANEL LANGUAGE

ENGLISH*, FRENCH, GERMAN, ITALIAN, SPANISH

Confirm the language that is displayed in the display.

SHOW WARNINGS

CASSETTE EMPTY............. ON*, OFF

A Warning status is a status in which the printer requires some remedy although 
the job is not affected. When the printer is in this status, an indicator blinks.

This item allows you to specify whether an indicator should blink when the printer 
is in the following Warning status.

NOTE

The printer prints when either ON or OFF is specified.

FEEDER MENU Options

SLOT PAPER SIZE

A4*, LTR, LGL, EXEC, MIXED SIZES, CUSTOM SIZE, CUSTOM SIZER, ENV. 
ISO-C5, ENV. COM10, ENV. MONARCH, ENV. DL, ENV. ISO-B5, INDEX CARD, 
STMT, 16K, A5, B5

Specifies the size of the paper loaded in the manual feed slot.

IMPORTANT

When you change the paper loaded in the manual feed slot frequently, it is 
convenient if SLOT PAPER SIZE is set to MIXED SIZES. If SLOT PAPER SIZE is 
set to MIXED SIZES, you do not need to specify the setting for SLOT PAPER SIZE 
each time you load the different size paper. However, observe the following when 
specifying MIXED SIZES.

Setting

Status

Indicator Blink

CASSETTE 
EMPTY

When the paper cassette 
has run out of paper

The 

 (Paper Source) indicator for 

the paper source that has run out of 
paper blinks.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands