manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 151

5-14

The Pr

inting En

vironment

5

Menu Functions and Menu Operation

NOTE

HARD RESET is displayed after you keep holding down [OK] 3 seconds or more when 
SOFT RESET is displayed in the display.

CANCEL JOB Menu

This section describes the function of the CANCEL JOB menu and the operating 
procedure for it.

CANCEL JOB Menu Functions

The CANCEL JOB menu allows you to cancel only the job currently being received 
or processed.

Pressing the 

 (Cancel Job) key and [OK] on the control panel while the job you 

want to cancel is being processed starts the cancel job process.

IMPORTANT

•

Cancel the job while the printer is processing the data (While the 

 (Job) indicator is on 

or blinking). No job is canceled by pressing the 

 (Cancel Job) key when the 

 (Job) 

indicator is off.

•

The data that has already been processed and is being printed (started to be fed) cannot 
be canceled. In this case, the next print data may be canceled.

•

When there is any print data sent from a printer driver other than that for this printer, 
multiple data may be canceled.

NOTE

When performing the 

 (Cancel Job) key, you may not be able to cancel the job even if 

<03 CANCELING JOB> is displayed.

Operating Procedure for the CANCEL JOB Menu

Pressing the 

 (Cancel Job) key and [OK] on the control panel while the job you 

want to cancel is being processed displays <03 CANCELING JOB> starts the 
cancel job process. Start the key operation from Step 1.

3

Determine the selected item.

Press [OK].

A soft reset is performed.

Operation Procedure

Key Operation

1

Cancel the job while the job is being
processed.

Press the 

 (Cancel Job) key.

CANCEL?

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands