manualshive.com logo in svg

Canon lpb3360, User Manual

Share
Download
Canon lpb3360 User Manual Download Page 139

5-2

Menu Functions

The Pr

inting En

vironment

5

Menu Functions

This section describes the menu functions and their categories.

 

Menu Functions

Before printing, specify the total print pages, paper size, etc. Generally, these 
settings are specified in an application or printer driver.

This printer, however, is supplied with many items as well as the settings for the 
total print pages and paper size, enabling printing for a wide array of uses. Some 
settings for this printer cannot be specified by application or printer driver. You can 
specify these settings using the "menu functions".

You can specify the settings using the menu functions easily because in the menu 
functions a variety of settings are classified by purpose.

There are the following two kinds of procedures for specifying the menu functions.

■

Settings Using the Printer's Control Panel

Specify the settings by pressing the keys while checking the display on the printer.

■

Settings Using the Remote UI

Some settings specified by the control panel can be specified by a web browser from your 
computer.

NOTE

•

For this section, this manual describes only the procedures for specifying the menu 
functions using the control panel. For details on specifying the settings using the Remote 
UI, see "Remote UI Guide".

•

The settings for the menu functions are registered to the memory (NVRAM) in which data 
is not deleted normally even if the printer is turned OFF. Therefore, even after cycling the 
power of the printer, it starts with its settings unchanged from when the printer was 
turned OFF last time.

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for lpb3360



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands