62
Advanced
Logo (including Logo and Logo Passcode lock setup)
You may use this function to select Logo screen, Logo
Passcode lock, change power on password, and set
up default logo screen.
1) Press
button to select [Logo] menu.
2) Press <OK> button.
3) Press
button to select required items.
Logo Select
Select this to set up the logo screen when power on
your projector:
Canon....
Display factory default logo screen.
User......
..Display capture logo screen (LH-WX370UST) .
Off......
.....Display countdown logo screen.
Logo
Logo
Canon
Off
Logo select
Capture
Logo Passcode change
Logo Passcode lock
Advanced
Logo menu
Capture(LH-WX370UST)
Enable us to capture images beeing projected and use it for a startup display or interval of presentattions.
Upon captureing the projected image, press OK
button, then a confirmation box appears, Select
Yes to capture it .
After capturing the projected images,go to "select a logo" , and set it to ”User”.Then,the captured
image is displayed when the projector is turned on next time.
Logo Passcode lock
This function helps preventing unauthorized personnel from changing the Logo screen.
Off......The Logo screen may be changed with the Logo menu..
On.... ..You may not alter the logo screen without the Logo
Passcode
.
To change the Logo Passcode protection, press OK key, and the Logo Passcode change popup
dialog box prompts. Follow stepsbelow to enter a logo screen password.
●
Press arrow
button to select a number, then press OK button to enter it and move the
cursor.The number you typed is displayed as “ * ”. To edit number you have entered, press
MENU button to move the cursor to the number you want to change, press
button to
select the correct one.
●
Repeat this step to type in a 3-digit number.Move the cursor to SET after you have typed the
3-dit number. Press OK button.
●
If the password is invalid, the password displayed as “ *** ” will be in red. Please try again with
a valid one.
●
After you have entered valid logo screen Passcode, you may press
button to toggle
switch Off and On.
Logo Passcode Change
You may change the Logo Passcode to any 3-digit number you like. Press OK key to select Logo
Passcode change. The Logo Passcode change dialog box prompts, press arrow
button to give
a valid new code. The New Logo Passcode dialog box prompts. Set up a new Logo Passcode,
check contentscontained in the dialog box, select Yes and the new password is set now.
Please remember your new password and keep it safe.
To Cancel the Logo Passcode
(1) While simultaneously pressing the [POWER] button and [OK] button on the main unit, plug the
power cord into the main unit and wait until the LED changes from blinking to lighting.
(2) Press the [POWER] button.
(3) Select OSD menu Logo >> Logo passcode lock>> "on". As the input screen appears again,
enter the default value (111) and set the pass code to "off" or set a new pass code.
Note:
●
After changing the Logo
Passcode to a new number,
please remember it and keep
it safe.