![background image](http://html.mh-extra.com/html/canon/lh-wu350ust/lh-wu350ust_user-manual_62466036.webp)
36
Basic operation
Power off your projector
1. Press the Power button at the top control
panel or the remote controller, the “Power
off?” message displays.
2. Press the Power button again within 4
seconds after the “Power off?” message
prompted to you. The POWER indicator
flashes red while the cooling fan continues
running. Do not unplug the power cord until
the fan stops running. Failure to do so may
shorten life cycle of your projector or lead
to power on failures or operation abnormali-
ties.
3. The POWER indicator stops flashing once
the projector has been cooled down to
ready for power on again.
Power off?
“Power off?” message disappears
in 4 seconds.
Note:
● If the “Direct Power On” function is set to “On”, your projector will power on once it is con
-
nected to an AC power socket. (Refer to
)
●
Speed of the cooling fan varies with internal temperature of your projector.
●
Do not place your projector in any box before it is fully cooled down.
● In case the POWER indicator flashes or turns red, refer to the “
S
tatus light indicator ” for
instructions.
●
The POWER indicator flashes when the light source is cooling down. Do not power on your
projector at this time. Power on your projector only after the POWER indicator turns red.
●
Unplug the power cord after the fan stops running..