background image

110 

 

Photos

Protecting Photos

You can protect photos from accidental erasure.

Protecting Single Photos

1 In single photo view, select the photo you want to protect.

2 Touch the screen to display the playback controls.

3 Protect the photo.

A

 appears and the photo cannot be deleted. Touch [

B

] again to 

remove the protection.

4 Drag your finger left/right to select another photo to protect or 

touch [

a

].

Protecting Photos from the Index Screen

1 Open the [Photos] index screen. 

2 Touch  [

a

] to open the photo selection screen.

3 Touch on the individual photos you want to protect.

• A checkmark 

O

 will appear on photos selected. Touch a selected 

photo again to remove the checkmark.

• To select all the photos at once: Touch [Select All] instead of touching 

individual photos. (Remove in advance any checkmarks from photos 
you may have selected individually.)

4 Protect the photos.

* Touch [Remove Protection] to remove the protection from the selected photos.

Operating modes:

[Edit] 

8

 [Protect] 

8

 [

B

]

[Edit] 

8

 [Protect] 

8

 [Protect]* 

8

 [OK]

Summary of Contents for LEGRIA HFM307


































































































































































































Reviews: