Playing Back Video
97
Displaying scene information
1 In either the AVCHD or MP4 movie index screen, touch [
I
].
2 Touch the desired scene.
• The scene information screen appears.
• If the optional GP-E2 Receiver was attached to the camcorder during recording, GPS information
will also appear.
• Touch
Ï
/
Ð
to select the previous/next scene.
3 Touch [
K
] twice when finished.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so
may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• You may not be able to play back with this camcorder movies recorded on a memory card using
another device.
NOTES
• You can turn off the recording date and time display or change the information displayed with the
s
>
[Data Code] setting.
• Depending on the recording conditions, you may notice brief stops in video or sound playback
between scenes.
• During fast/slow playback, you may notice some anomalies (blocky video artifacts, banding, etc.) in
the playback picture.
• The speed indicated on the screen is approximate.
• Slow reverse playback will look the same as continuous frame reverse.
Capturing Photos During Movie Playback
You can capture a photo while a movie is being played back.
1 Play back the scene from which you want to capture the photo.
2 Pause the playback at the point where you want to capture the photo.
3 Touch [PHOTO].
4 Touch [
Ñ
] to stop the playback.
NOTES
• The size of the captured photos will be 1920x1080.
• The date of the photos will reflect the date and time of recording of the original scene.
• Photos captured from a scene with a lot of fast movement may be blurred.
• Photos will be recorded on the memory card selected for recording photos.
COP
Y
