External Connections
121
Saving Your Recordings
Saving Your Recordings on a Computer
Movies recorded with this camcorder are saved in the built-in memory
or on the memory card. Because space is limited, make sure to save
your recordings on a computer on a regular basis.
PIXELA ImageMixer 3 SE
With the software supplied on the
Transfer Utilities
CD-ROM you can
save scenes to your computer's hard disk. If necessary, video files
previously saved on a computer can be restored back to the
camcorder. The software on the supplied
Video Tools
CD-ROM offers
many options for organizing your video library, editing video and more.
For details about installing the software, refer to ‘PIXELA ImageMixer 3
SE’ Installation Guide. For details about using the software, refer to the
software guide on the
Transfer Utilities
CD-ROM.
Saving your Recordings without a Computer
The following options are also available:
• Use the optional DW-100 DVD Burner to create high-definition
(AVCHD) discs of your movies* and Photo DVDs of your photos
(
122).
• Connect the camcorder to an external recording device (DVD or HDD
recorder, VCR, etc.) to save standard-definition copies of your
movies (
* Not available for scenes recorded in MXP mode.
IMPORTANT
• While the camcorder is connected to a computer, do not open the
memory card slot cover and do not remove the memory card.
• When restoring to the camcorder video files that were saved to the
computer, do not disconnect the USB cable or turn off the camcorder
or computer. Doing so may result in scenes that cannot be played back
on the camcorder.
CO
PY
