Canon LEGRIA HF G60 Instruction Manual Download Page 19

Page: 19 / 127

Preparing the Power

upply

• If remaining battery time is an issue, you can power the camcorder using the compact power adapter so the

battery pack will not be consumed.

• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or the day

before, to ensure a full charge.

• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might need.

• For handling precautions regarding the battery pack, refer to

Safety Instructions and Handling Precautions

(

113). For charging times and approximate usage times, refer to

Reference Tables

(

123).

Checking the Remaining Battery Charge

With the camcorder turned off, press the BATT. INFO button to
display for about 5 seconds a screen showing the approximate
battery charge level. Note that if the battery charge is too low,
the battery information screen may not appear.

Summary of Contents for LEGRIA HF G60
































































































































Search results

Summary of Contents for LEGRIA HF G60

Reviews:

Related manuals for LEGRIA HF G60

Brands by name

Popular brands

Canon LEGRIA HF G60, Instruction Manual

Search results

Summary of Contents for LEGRIA HF G60

Reviews:

Related manuals for LEGRIA HF G60

Brands by name

Popular brands