Canon LEGRIA HF G60, Instruction Manual

Page: 103 / 127

103
Menu Option s
[
É
Playbac k S etup] menu ( mode only)
[Flicker Reduction] [
j
Off] , [
k
Automatic]
When this setting is set to [
k
Automatic], the camcorder will automatically detect and reduce
flicker.
• When recording under light sources such as fluorescent, mercury or halogen lamps, the screen
may flicker depending on the shutter speed. You may be able to avoid flicker by setting the shutter
speed mode to a value matching the frequency of the local electrical system: 1/100 for 50 Hz
systems, 1/
6 0 for 6 0 Hz systems.
[Conversion Lens] [
¾
TL-U58], [
¿
WA-U58], [
j
Off]
When you attach to the camcorder the optional TL-U58 Tele-converter or WA-U58 Wide Attachment,
set the appropriate conversion lens setting. The image stabilization method and minimum focusing
distance will change according to the accessory used. The minimum focusing distance throughout
the entire zoom range will be 130 cm for the tele-converter and about
6 0 cm for the wide
attachment.
• The tele-converter increases the focal length of the lens by a factor of approx. 1.5. The wide
attachment reduces the focal length of the lens by a factor of approx. 0.8.
• The approximate focusing distance displayed on the screen will change depending on the setting.
Select [
j
Off] when a conversion lens is not attached to the camcorder.
• When a setting other than [
j
Off] is selected, [
v
Camera Setup]
>
[AF Mode] will not be
available.
[Image Stabilizer] [
®
Off], [
¯
Standard] , [
°
Dynamic] (
A
53)
[Powered IS Button] [
Î
Press and Hold] , [
Ï
Toggle On/Off]
Determines the operation mode of the POWERED IS button (
A
53).
[
Î
Press and Hold]: Powered IS will be activated while you hold the button pressed down.
[
Ï
Toggle On/Off]: Each press of the button will turn the Powered IS function on and off.
[Set WB Priority] [ Automatic] , [
¼
Daylight], [
É
Tungsten], [ Color Temperature], [ Set 1], [ Set 2]
This setting is convenient when you need to use a particular white balance setting frequently. You can
press an assignable button set to [
Ä
WB Priority] to switch between the current white balance and
the white balance setting selected for [Set WB Priority].
[Focus/Zoom Ring Operation] [ Enable] , [ Disable]
Selects whether to enable or disable the focus/zoom ring's operation.
[Focus Ring Direction] [
h
Normal] , [
X
Reverse]
Changes the direction the focus/zoom ring needs to be turned when using it to adjust the focus (when
the focus/zoom ring switch is set to FOCUS).
[Focus Ring Response] [
Z
Fast], [
[
Normal] , [
]
Slow]
Selects the sensitivity of the response when operating the focus/zoom ring to adjust the focus (when
the focus/zoom ring switch is set to FOCUS).
[Zoom Ring Direction] [
h
Normal] , [
X
Reverse]
Changes the direction the focus/zoom ring needs to be turned when using it to adjust the zoom (when
the focus/zoom ring switch is set to ZOOM).
Menu item Setting options and additional information
[
¸
Data Code] [
j
Off], [
%
Date]
[
{
Data Code] [
j
Off], [
%
Date], [
&
Time], [ Date and Time] , [
{
Camera Data]
Displays the date when a clip was recorded ([
¸
Data Code]) or the date and/or time or camera
settings used when a photo ([
{
Data Code]) was recorded.
Menu item Setting options and additional information