Canon LBP7780CX User Manual Download Page 931

Page: 931 / 1004

07YL-0KC

Paper curls or creases.

Streaks (lines) appear.

White Streaks (Lines) Appear
Color Streaks (Lines) Appear
Streaks (Lines) Appear in Gradated Portions
Uneven Gloss, Streaks, or Flaws Appear on Dense Color Areas

Unevenness or smudge marks appear.

Printing Is Uneven
Printed Pages Have White Specks
The Toner Does Not Fix onto the Paper Well
The Printed Paper Has Smudge Marks
Smudge Marks of Spattering Toner Appear around the Text or Patterns
The Back of the Printed Paper Has Smudge Marks
The Overall Print Result Is Dark
Residual Images Appear on Non-printed Areas
White Dust Is Attached to the Printed Transparencies

Printing is faint or faded.

The Overall Print Result Is Faint
Thin Lines Are Faded or Halftone Images Are Faint
Colored Lines and Text Appear Faded
Colored Text Appears Blurred
Data Is Not Printed in the Correct Color (Specified Color) Due to Color Mismatch
Thin Lines or Fill Patterns Are Not Printed with the Specified Colors or Do Not Appear At All
Shaded Patterns Are Not Printed in the Correct Color (Specified Color)
Photographs and so on Are Printed in Different Colors from Those Displayed on the Monitor
Fill Patterns and Borders Are Not Printed in the Correct Color (Specified Color) Even When the Same
Color Is Specified for Them
Square Areas That Cannot Be Seen on the Display Appear around Lines or Text and Are Printed in a
Different Color from the Other Areas
Superimposed Diagrams Are Not Printed in the Correct Color

Poor Printout Results

㻥㻟㻝㻌㻛㻌㻝㻜㻜㻠

Summary of Contents for LBP7780CX













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LBP7780CX

Reviews:

Brands by name

Popular brands

Canon LBP7780CX, User Manual

Search results

Summary of Contents for LBP7780CX

Reviews:

Brands by name

Popular brands