manualshive.com logo in svg

Canon LBP710Cx, User Manual

Share
Download
Canon LBP710Cx User Manual Download Page 679

Notice

0YSF-08K

◼

International ENERGY STAR Program

  As an ENERGY STAR® Partner, Canon Inc. has determined that this product meets the

ENERGY STAR Program for energy efficiency.
The International ENERGY STAR Office Equipment Program is an international program that
promotes energy saving through the use of computers and other office equipment.
The program backs the development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which business proprietors
can participate voluntarily.
The targeted products are office equipment, such as computers, displays, printers,
facsimiles, and copiers. The standards and logos are uniform among participating nations.

◼

IPv6 Ready Logo

  The protocol stack included in this machine has obtained the IPv6 Ready Logo Phase-2

established by the IPv6 Forum.

◼

WEEE and Battery Directives

     

Only for European Union and EEA (Norway, Iceland and Liechtenstein)

These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE

Directive (2012/19/EU), the Battery Directive (2006/66/EC) and/or national legislation implementing those Directives.

If a chemical symbol is printed beneath the symbol shown above, in accordance with the Battery Directive, this

indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a

concentration above an applicable threshold specified in the Battery Directive.

This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when

you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic

equipment (EEE) and batteries and accumulators. Improper handling of this type of waste could have a possible

impact on the environment and human health due to potentially hazardous substances that are generally associated

with EEE. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural

resources.

For more information about the recycling of this product, please contact your local city office, waste authority,

approved scheme or your household waste disposal service or visit www.canon-europe.com/weee , or www.canon-

europe.com/battery .

Appendix

673

Summary of Contents for LBP710Cx































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands