manualshive.com logo in svg

Canon LBP710Cx, User Manual

Share
Download
Canon LBP710Cx User Manual Download Page 547

Common Problems

0YSF-06E

If you encounter problems when using the machine, check the items in this section before contacting us. If the

problems persist, contact your local authorized Canon dealer or the Canon help line.

Check the Following

Is the machine turned ON? Is the power cord connected?

●

If 

 and the display of the operation panel are in the off state, it indicates that a quick turn-OFF has

been  performed  or  the  machine  has  not  been  turned  ON.  If  the  machine  does  not  respond  when  you
press the power switch, check whether the power cord is connected correctly, and press the power switch
again. For power cord connection, see "Getting Started".

Operation Panel(P. 24)
Manuals Included with the Machine(P. 637)

Are the LAN cable and USB cable connected correctly?

●

Check whether these cables are connected correctly.

Parts and Their Functions(P. 16)

Is sleep mode activated?

●

If  you  leave  the  machine  unattended  for  a  specific  period  of  time,  it  enters  sleep  mode  for  power
conservation, not allowing you to operate it.
To cancel sleep mode, press 

.

Is any message displayed on the screen?

●

If a problem occurs, a message is displayed.

When an Error Message Appears(P. 519)

If a problem persists even after checking

Click the link that corresponds to the problem.

Installation/Settings Problems(P. 542)
Printing Problems(P. 545)

Troubleshooting

541

Summary of Contents for LBP710Cx































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands