Canon LBP6310dn Manual Download Page 235

Page: 235 / 452

07K5-052

This section describes the procedure for using NetSpot Device Installer without installing it.

For details on the procedure for installing NetSpot Device Installer, see "

Installing NetSpot Device Installer

Make sure that the LAN cable is connected properly, and the printer is turned ON.

"Connecting the Printer and Computer"

Turn the computer on, and then log on to Windows as a user with administrative rights.

Insert the supplied CD-ROM "User Software" into the CD-ROM drive of your computer.

Click [Additional Software Programs].

If the above screen does not appear

Basic Operations/Various Information for Windows

If the [AutoPlay] dialog box appears

Click [Run AUTORUN.EXE].

Setting the IP Address Using NetSpot Device Installer

㻞㻟㻡㻌㻛㻌㻠㻡㻞

Summary of Contents for LBP6310dn





































































































































































































































































































































































































































































Search results

Summary of Contents for LBP6310dn

Reviews:

Canon LBP6310dn, Manual, Page: 235 / 452

Search results

Summary of Contents for LBP6310dn

Reviews: