Canon LBP5000 Series, Service Manual

Page: 98 / 162

Chapter 3
3-18
F-3-120
8) Remove the low-voltage power supply PCB [1].
- 4 screws [3]
F-3-121
3.2.15.3 The former procedure of Removing the Low-
Voltage Power Supply PCB
0011-1007
LBP5000
1) Remove the delivery tray.
(page 3-7)
Reference[Removing the Delivery
Tray]
2) Remove the rear cover. (page 3-2) Reference[Removing the Rear Cover]
3) Remove the right cover/right cassette cover. (page 3-
3)
Reference[Removing the Right Cover/Right Cassette Cover]
4) Remove the upper cover. (page 3-5) Reference[Removing the Upper
Cover]
5) Remove the left cover/left cassette cover.
(page 3-
4) Reference[Removing the Left Cover/Left Cassette Cover]
6) Remove the face-down cover. (page 3-7) Reference[Removing the Face-
Down Cover]
3.2.15.4 Removing the Low-Voltage Power Supply PCB
0010-7037
LBP5000
1) Remove the rear upper plate [1].
- 4 screws [2]
F-3-122
2) Remove the 9 connectors [1], and free the cable from the cable guide.
F-3-123
3) Remove the cable guide [1].
- 2 claws [2]
F-3-124
4) Slide the cable guide [1] to the left to detach.
F-3-125
5) Disconnect the 3 connectors [1].
F-3-126
6) Remove the 3 harness retainers [1], and remove the cable.
F-3-127
7) Free the cable from the cable guide [1].
F-3-128
8) Remove the low-voltage power supply PCB [1].
- 1 connector [2]
- 4 screws [3]