Canon LBP5000 Series, Service Manual

Page: 107 / 162

Chapter 3
3-27
F-3-184
8) Remove the ETB unit [1].
F-3-185
When removing the ETB, be sure not to touch the surface of the ETB.
3.4.3.3 The former procedure of removing the ETB Unit
0011-1026
LBP5000
1) Remove the delivery tray.
(page 3-7)
Reference[Removing the Delivery
Tray]
2) Remove the rear cover. (page 3-2) Reference[Removing the Rear Cover]
3) Remove the right cover/right cassette cover. (page 3-
3)
Reference[Removing the Right Cover/Right Cassette Cover]
4) Remove the upper cover. (page 3-5) Reference[Removing the Upper
Cover]
5) Remove the left cover/left cassette cover.
(page 3-
4) Reference[Removing the Left Cover/Left Cassette Cover]
6) Remove the front cover. (page 3-6) Reference[Removing the Front
Cover]
3.4.3.4 Removing the ETB Unit
0011-0097
LBP5000
Assembly and Disassembly of ETB unit should be done with the ETB unit
closed.
1) Remove the inner cover [1].
- 3 screws [2]
F-3-186
2) Remove the cam [1].
- 1 screw [2]
F-3-187
3) Remove the cable cover [1].
F-3-188
4) Remove the screw [1].
5) Disconnect the connector [2].
6) Remove the harness retainer [3].
F-3-189
7) Remove the cam [1].
- 1 screw [2]
F-3-190
8) Remove the ETB unit [1].
F-3-191
When removing the ETB, take care not to touch the surface of the ETB.