Canon LBP351 Series User Manual Download Page 529

Page: 529 / 642

<Non-Canon cart. not covered by warranty.>

This message notifies you that the machine may not print in optimum quality. It is recommended that you

replace this cartridge with a new one.

●

You can continue printing when this message is displayed, but the print quality may deteriorate.
Doing so may result in damage to the machine.

◼

If Printouts are Poor in Quality

If your printouts begin to show any of the following features, one of your toner cartridges is consumed. Replace the

nearly empty toner cartridge even if no message is displayed. How to Replace Toner Cartridges(P. 524)

Streaks appear

Partially faded

Uneven density

Afterimages appear in blank areas

White spots appear

◼

Checking the Amount Remaining in the Toner Cartridge

You can check the amount remaining in the toner cartridge on the main screen. It is recommended that you check the

amount before you start to print a large job.

Maintenance

522

Summary of Contents for LBP351 Series



































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LBP351 Series

Reviews:

Related manuals for LBP351 Series

Brands by name

Popular brands

Canon LBP351 Series, User Manual

Search results

Summary of Contents for LBP351 Series

Reviews:

Related manuals for LBP351 Series

Brands by name

Popular brands