Canon LBP351 Series User Manual Download Page 453

Page: 453 / 642

Network Status Print

Select to print a list of the settings ( Network(P. 375) ) about the network configured in the machine. You can also

check the information about the security including the address filter settings and IPSec settings. Network Status

Print(P. 536)

Consmbl. Status Prt.

The information such as toner remaining amount, warning messages, and information on where you can purchase

new toner cartridges is printed out. Consmbl. Status Prt.(P. 537)

IPSec Policy List

Select to print a list of the IPSec policy names and settings ( Configuring IPSec Settings(P. 298) ) configured in the

machine. IPSec Policy List(P. 537)

PCL Utility

Select to print a list of the internal information items registered in the machine for use of the PCL mode.

Font List

Select to print a list of the fonts that can be used in the PCL mode. PCL Font List(P. 540)

PS Utility

Select to print a list of the settings for use of the PS mode and the internal information items registered in the

machine. PS Mode List(P. 540)

Configuration Page

Select to print a list of the machine settings ( PS(P. 439) ).

Font List

Select to print a list of the fonts that can be used in the PS mode.

Cleaning

Select to clean the fixing unit when black spots or streaks appear on printouts. Fixing Unit(P. 520)

E-Mail Print Utility

Select to manually receive e-mails and print a log of received e-mails in list form.

Received E-Mail

Select to manually receive e-mails from the POP3 mail server and print them. Manually Receiving E-

Mails(P. 162)

E-Mail RX Log List

Select to print a log consisting of subjects and received date/time of e-mails received in the machine in list form.

E-Mail Print Log(P. 543)

Setting Menu List

446

Summary of Contents for LBP351 Series



































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for LBP351 Series

Reviews:

Related manuals for LBP351 Series

Brands by name

Popular brands

Canon LBP351 Series, User Manual

Search results

Summary of Contents for LBP351 Series

Reviews:

Related manuals for LBP351 Series

Brands by name

Popular brands