manualshive.com logo in svg

Canon LBP3010 Series, Service Manual, Page: 86 / 146

Share
Download
Canon LBP3010 Series Service Manual Download Page 86

Chapter 3  

3-8

F-3-17

3.1.7.3 Before Removing the Pickup Tray Unit

0025-1216

LBP6000 / LBP6000B

1) Remove the Upper Cover. 

(page 3-5)

Reference[Removing the Upper

Cover]

2) Remove the Left Cover. 

(page 3-3)

Reference[Removing the Left Cov-

er]

3) Remove the Right Cover. 

(page 3-2)

Reference[Removing the Right

Cover]

4) Remove the Front Cover. 

(page 3-6)

Reference[Removing the Front

Cover]

5) Remove the Separation Pad. 

(page 3-34)

Reference[Removing the Sep-

aration Pad]

3.1.7.4 Removing the Pickup Tray Unit

0025-1217

LBP6000 / LBP6000B

1) Remove the 4 screws [1], and turn the machine in the direction of the ar-
row.

F-3-18

2) Remove the Pickup Tray Unit [3]. 

- 4 Screws [1]
- 4 Hooks [2]

When attaching the pickup tray to the host machine, put the pickup tray [2] 
onto the pickup roller [1].

[1]

[1]

[3]

[2]

[2]

[1]

 

CAUTION:

When disassembling and assembling, be careful not to loose the 2 springs 
[1] of the Pickup Tray Unit.

[1]

[1]

Summary of Contents for LBP3010 Series



















































































































































Reviews:

No comments