Canon LBP253 SM Manual Download Page 100

Page: 100 / 167

9. Remove Main Drive Unit [1].

• 4 Screw [2]

[2]

[1]

[2]

[3]

[4]

CAUTION:

The main drive gears are not fastened to the metal
plate. Take care that the gears do not come apart.

Removing the Duplex Drive

Unit

■ Preparations

1. Remove Right Cover.

“Removing the Right Cover”

on page 80

2. Remove Main Fan.

“Removing the Main Fan” on page

■ Procedure

1. Remove Duplex Drive Unit [1].

• 3 Screw [2]

[1]

[2]

CAUTION:

Be sure to install the black gear[2] to the side where a
left-direction arrow[1] is marked.

[1]

[2]

Removing the Cassette Pickup

Solenoid

■ Preparations

1. Remove Right Cover.

“Removing the Right Cover”

on page 80

4. Disassembly/Assembly

Summary of Contents for LBP253 SM








































































































































































Search results

Summary of Contents for LBP253 SM

Reviews:

Related manuals for LBP253 SM

Brands by name

Popular brands

Canon LBP253 SM, Manual

Search results

Summary of Contents for LBP253 SM

Reviews:

Related manuals for LBP253 SM

Brands by name

Popular brands