11-7
T
roubleshootin
g
LCD Messages
See the table below when the LCD displays error messages.
Common
Message
Description
Action
CHANGE REG’D SIZE*
When the machine prints the
reports or lists, the paper
size is set to a size other
than <A4> or <LTR>.
Set the paper size to <A4>
or <LTR> and load paper of
the same size. For the TX
report or RX report, the
machine automatically prints
the report(s) which was
stored in memory.
CHECK PRINTER
A problem has occurred in
the printer.
Reset the machine by
opening the front cover and
then closing it. If the
message persists, unplug
the machine from the power
supply and contact your local
authorized Canon dealer or
the Canon help line.
CLOSE COVER
FRONT COVER
The front cover is not closed
completely.
Check the front cover, and
make sure that it is
completely closed.
