Canon Laser Shot LBP5000, User Manual

Page: 275 / 418

4-92
Pr
inting a Document
Printer Status Window
4
[Device Settings] Menu
You can specify the settings related to the printer, such as specifying the size of the
paper in the paper cassette, sleep settings, and the settings for calibration.
■
[Register Paper Size in Cassettes]
Specifies the size of the paper loaded in the paper cassette. For more details, see
"Loading Plain Paper, Heavy Paper, Transparencies, or Labels in the Paper Source" (p.
2-14), "Loading Index Card Size Media in the Paper Source" (p. 2-26), "Loading
Envelopes in the Paper Source" (p. 2-37), and "Loading Custom Size Paper
(Non-Standard Paper) in the Paper Source" (p. 2-47).
■
[Sleep Settings]
Specify whether to use the sleep mode or the time to switch to the sleep mode. When
data is not sent from the computer or when the printer status remains as it is longer than
the time specified in [Time to Enter Sleep Mode], the printer switches to the sleep mode.
The sleep mode consumes less power during the sleep state. When you use the sleep
mode, select the [Use Sleep Mode] check box, and then specify the time to switch to the
sleep mode in [Time to Enter Sleep Mode]. For more details, see "Power Saving (Sleep
Mode)," on p. 1-12.
■
[Calibration Settings]
You can perform calibration automatically at the designated time everyday. When data is
not sent from the computer or when the printer status remains as it is longer than the fixed
period, the printer can automatically perform calibration periodically. For more details, see
"Calibrating the Printer," on p. 5-17.
■
[Warning Display Setting]
Specify whether to display the message that warns you of the printer status (the message
indicating that the toner cartridge needs to be replaced) in the Printer Status Window.
■
[Network Settings] (Only when the network board is installed)
If you are using Windows XP Service Pack 2 or another operating system equipped with
Windows Firewall, and the network settings for the printer is not specified, the printer may
not be detected when installing the software for the network environment. In this case,
connect the printer and computer with the USB cable, install the printer driver, and then
specify the network settings in this dialog box in advance. For more details, see "Network
Guide".
■
[Assisting Print Setting]
You can specify the method for printing data that contains both color pages and
black-and-white pages.
■
[Small-size Paper Special Setting]
When printing with paper switched from narrow paper (A5 size etc.) to wider paper (A4
size etc.), the printer may stop operating temporarily to cool down the fixing unit so that
the print quality is maintained. You can specify the waiting time before the print operation
begins for this case.