Canon Laser Shot LBP-5100, User Manual

Page: 357 / 494

6-20
Routine Maintenance
6
Calibrating the Printer
3
Select the [Auto Calibration after Fixed Period] check box in
the [Calibration Settings] dialog box.
4
Click [OK].
Specifying Whether Calibration Should Be Prioritized
You can specify which operation, printing or calibration, should be prioritized when
calibration is to be performed by the automatic calibration function etc.
Printing is to be prioritized by default.
IMPORTANT
•
When any toner cartridge is replaced, calibration is prioritized even if [Print Priority] is
selected.
•
If calibration is performed for some reason by the completion of the printing, another
calibration is not performed even with [Print Priority] selected after the completion of the
printing.
• When the printer is under any of the following circumstances, calibration is not performed
even if [Calibration Priority] is selected.
- When the time specified in [Use Periodical Calibration Timer] in the [Calibration
Settings] dialog box has come during printing (Calibration is performed after the print
job finishes. However, calibration is performed when approximately 150 pages are
printed.)
- When the time specified in [Use Periodical Calibration Timer] has come within 30
minutes after performing calibration last time (However, calibration is performed when
approximately 150 pages are printed.)