manualshive.com logo in svg

Canon LASER SHOT LBP-3600, User Manual

Share
Download
Canon LASER SHOT LBP-3600 User Manual Download Page 382

Network Board

6-51

Optional Accessor

ies

6

13

Install the network board.

NOTE

If the optional duplex unit was previously installed, reinstall it on the printer. For 
details on the procedure for installing the duplex unit, see "Installing the Duplex 
Unit," on p. 6-32.

14

Connect all interface cables and the power cord to the printer.

15

Plug the power plug into the AC power outlet.

 

Removing the Network Board

Remove the network board using the following procedure. Have ready the 
protective plate and screw for the expansion slot removed when the network board 
was installed.

CAUTION

•

Be sure that the power of the printer is turned OFF and all interface cables and 
power cord are disconnected from the printer before removing the network 
board. Replacing with the power ON or the cables and power cord connected 
may result in an electrical shock.

•

Be careful when handling the network board. Touching the edges or a sharp 
portion of the network board may result in personal injuries.

1

Press "

" of the power switch to turn the printer OFF, then 

unplug the power plug from the AC power outlet.

2

Remove all interface cables and the power cord.

NOTE

If the optional duplex unit is installed, remove it from the printer. For details on 
removing the duplex unit, see "Removing the Duplex Unit," on p. 6-34.

3

Remove the 2 screws and remove the network board.

Store the network board in the protective bag that it came in.

Summary of Contents for LASER SHOT LBP-3600












































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands