manualshive.com logo in svg

Canon LASER SHOT LBP-3600, User Manual

Share
Download
Canon LASER SHOT LBP-3600 User Manual Download Page 340

Paper Feeder

6-9

Optional Accessor

ies

6

 

Parts and Their Functions

a

a

a

a

Transport Guide

Opened when removing jammed paper.  (See p. 
7-21)

b

b

b

b

Paper Cassette

Up to 250 sheets of paper (64 g/m

2

) at sizes of A3, 

B4, A4, B5, A5, Ledger, Legal, Letter, and Executive 
can be loaded. (See p. 2-17)

Removing the Packing Materials

The paper feeders are provided with tapes and packing material to be protected 
from excessive vibrations and shocks during delivery. Remove the tapes and 
packing material before installing the paper feeders on the printer.

IMPORTANT

•

If there is any packing material remaining inside the paper feeder, this may result in 
misfeeds or damage to the printer when operating the printer. Be sure to follow the 
procedure to remove all the packing materials.

•

The removed packing materials are required when transporting the printer for reasons 
such as relocating or servicing. Keep them where they will not get lost.

a

b

250-sheet Paper Feeder Unit PF-66

250-sheet Paper Feeder Unit PF-66E

Summary of Contents for LASER SHOT LBP-3600












































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands