manualshive.com logo in svg

Canon LASER SHOT LBP-3600, User Manual

Share
Download
Canon LASER SHOT LBP-3600 User Manual Download Page 335

Optional Accessories

6-4

Optional Accessor

ies

6

Duplex Unit

The duplex unit DU-66 is a unit that enables automatic 2-sided printing. The duplex 
unit is to be installed on the back of the main unit. You can perform automatic 
2-sided printing on standard paper sizes (A3, B4, A4, B5, A5, Ledger, Legal, Letter 
and Executive).

IMPORTANT

You cannot perform automatic 2-sided printing on heavy paper (91 - 128 g/m

2

), 

transparencies, labels, envelopes, and custom paper sizes.

NOTE

•

The duplex unit is designed for LBP3800/3700/3600. Duplex units designed for other 
printers cannot be used.

•

For details on the procedure for installing the duplex unit, see "Duplex Unit," on p. 6-28.

Duplex Unit DU-66

Summary of Contents for LASER SHOT LBP-3600












































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands