Canon LASER SHOT LBP-1210 User Manual Download Page 68

Page: 68 / 186

Using the Canon

Advanced Printing

Technology

Chapter 3

Using the Canon Advanced Printing Technology

14. If you opted to print a test page, the page prints after installation

completes, and the following dialog appears. If the page printed
correctly, click

Windows XP Add Printer Wizard

To install the CAPT on a local computer using Windows XP, you can use
the

Add Printer Wizard

Following is the installation procedure for “Using Parallel Port” under
Windows XP.
To install the LBP-1210 printer driver to USB port, perform procedure as
same as “

Plug and Play

”.

Log on as member of Administrators. The full control access right
for the printer is necessary for the installation of the CAPT.

From the

Start

menu, select

Printers and Faxes

. The

Printers and

Faxes

folder appears.

Summary of Contents for LASER SHOT LBP-1210



























































































































































































Search results

Summary of Contents for LASER SHOT LBP-1210

Reviews:

Brands by name

Popular brands

Canon LASER SHOT LBP-1210, User Manual

Search results

Summary of Contents for LASER SHOT LBP-1210

Reviews:

Brands by name

Popular brands