manualshive.com logo in svg

Canon LASER SHOT LBP-1210, User Manual

Share
Download
Canon LASER SHOT LBP-1210 User Manual Download Page 47

30

Using the Canon Advanced Printing Technology

Chapter 3

Click only 

Specify the location

 then click 

Browse…

 to select the driver 

you want to install. For example, if your CD-ROM drive is drive D, 
browse to D:\English\WinMe and click 

OK

.

5.

The screen displays the selected driver file. Click 

Next >

.

6.

Enter the name you wish to use, then click 

Finish

.

7.

When the installation is complete, the following dialog box appears. 
To close the dialog box, click 

OK.

 Click 

Finish

 on the 

Add New 

Hardware Wizard.

Add Printer Wizard 

To install the CAPT on a local computer using Windows 95/98/Me, you 
can use the Windows 95/98/Me 

Add Printer Wizard

.

Following is the installation procedures for “Using Parallel Port” under 
Windows 98.
To install the LBP-1210 printer driver to USB port, perform procedure as 
same as “

CD-ROM Installation

” or “

Plug and Play

”.

1.

From the 

Start

 menu, select 

Settings

, then 

Printers

. The 

Printers

 

folder appears.

Summary of Contents for LASER SHOT LBP-1210



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands