manualshive.com logo in svg

Canon LASER SHOT LBP-1210, User Manual

Share
Download
Canon LASER SHOT LBP-1210 User Manual Download Page 168

Glossary

Glossary

151

Glossary

A

AC

Alternating Current. The type of electrical current typically available 
from household wall outlets.

Adapter

An optional device that allows you to connect your printer directly to a 
network. 

See also 

Peer-to-peer connection.

Alert

A message displayed in the Printer Status Window when a problem or 
condition caused the Canon Advanced Printing Technology to pause 
printing. You must follow the on-screen instructions before printing 
resumes.

Audio messages

Audio messages notify the user of the printer operations shown in the 
Status Window.

Automatic Image Refinement

A printer technology from Canon, with which the printer automatically 
senses and refines the jagged edges and ragged curves of characters and 
graphics.

B

Bi-directional communications

Allows information to pass back and forth between the Canon Advanced 
Printing Technology software and a local printer.

Bold

A characteristic of a printed character that indicates wider, darker 
representation. Also referred to as emphasized or double-strike printing.

Summary of Contents for LASER SHOT LBP-1210



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands