manualshive.com logo in svg

Canon LASER SHOT LBP-1210, User Manual

Share
Download
Canon LASER SHOT LBP-1210 User Manual Download Page 115

98

Using the Canon Advanced Printing Technology

Chapter 3

Options Menu

You can select the 

Options

 menu from the menu bar of the LBP-1210 

Status Window:

The 

Options

 menu includes the following selections:

❏

Status Options

—This opens the 

Status Options

 dialog box that lets 

you change the settings for the Status Window.

❏

Port Setting

—This opens the 

Port Setting

 dialog box when the 

printer is connected to a local parallel port. This setting is unavailable 
if the printer is not connected to a local parallel port, or while printing 
is in progress.

❏

Cleaning

—This setting allows you to print pages that clean the 

printer’s rollers. This setting is not available while printing is in 
progress or when there are errors.

Summary of Contents for LASER SHOT LBP-1210



























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands