Canon Laser Shot LBP-1110 User Manual Download Page 160

Page: 160 / 189

Maintenance

Chapter 5

Maintenance

145

Storage Guidelines

•

Store the cartridge in its protective bag. Do not open

the bag until you are ready to install the cartridge in
the printer.

•

Do not store the cartridge where it will be exposed

to direct sunlight.

•

Do not stand the cartridge on end, and do not turn it

upside down. If the toner becomes caked in the
cartridge, it may prove impossible to free it even by
shaking the cartridge, and print quality can
deteriorate.

•

Do not store the cartridge at a high temperature or in

high humidity, or in places where the temperature or
humidity can change abruptly.

•

Store the cartridge at temperatures between 0˚C and

35˚C (between 32˚F and 95˚F).

•

Do not store the cartridge in salty air or where there

are corrosive gases such as those from aerosol
sprays.

•

Keep the cartridge away from a monitor's cathode

ray tube (CRT), disk drives and floppy disks. The
magnet in the cartridge can distort the image on the
CRT, or damage data on disks.

Summary of Contents for Laser Shot LBP-1110






























































































































































































Search results

Summary of Contents for Laser Shot LBP-1110

Reviews:

Related manuals for Laser Shot LBP-1110

Brands by name

Popular brands

Canon Laser Shot LBP-1110, User Manual

Search results

Summary of Contents for Laser Shot LBP-1110

Reviews:

Related manuals for Laser Shot LBP-1110

Brands by name

Popular brands