manualshive.com logo in svg

Canon Laser Class 810, Basic Operation Manual

Share
Download
Canon Laser Class 810 Basic Operation Manual Download Page 313

11-23

Troubleshoot

ng

Paper Feeding Problems

Paper does not feed properly.

Is the paper loaded correctly?

Make sure the paper s correctly loaded. (See “Set Up the Machne,” n the Starter 
Gude.)

Does the machine contain too many sheets?

Make sure you load the correct quantty. (See “Paper Requrements,” on p. 2-7.)

Multiple sheets feed together into the machine.

Is the paper loaded correctly?

Make sure the paper s correctly loaded. (See “Set Up the Machne,” n the Starter 
Gude.)

Does the machine contain too many sheets?

Make sure you load the correct quantty. (See “Paper Requrements,” on p. 2-7.)

Are different types of paper loaded in the machine?

Load only one type of paper.

Make sure you load paper that meets the requrements for use. (See “Paper 
Requrements,” on p. 2-7.)

Let the paper run out before refllng the machne. Avod mxng new stock wth 
paper already loaded.

Repeated paper jams occur.

Is the correct type of paper loaded in the machine?

Make sure you load paper that meets the requrements for use. (See “Paper 
Requrements,” on p. 2-7.)

Summary of Contents for Laser Class 810





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands