Canon Laser Class 810, Basic Operation Manual

Page: 292 / 412

Troubleshoot
ng
11-2
Clearing Jams
This section describes how to remove
jammed paper. When error messages
appear on the LCD display, see “LCD
Messages,” on p. 11-7. For other troubles,
see Reference Guide > Troubleshooting.
When <CHECK DOCUMENT>, <FEEDER
PAPER JAM/CHECK THE FEEDER>,
<DOCUMENT TOO LONG>, or <PAPER
JAM> appears on the LCD display,
remove jammed paper from the machine
first, then from the paper cassette or
multi-purpose tray if necessary. Check
the following if you experience repeated
paper jams:
Fan and tap the paper stack on a
flat surface before loading it in the
machine.
Check that the paper you are using
meets the requirements for use. (See
“Paper Requirements,” on p. 2-7.)
Make sure you have removed any
scraps of paper from the inside of the
machine. –
–
–
When removng jammed documents or paper,
take care not to cut your hands on the edges of the
document or paper.
When removng jammed paper or when nspectng
the nsde of the machne, do not allow necklaces,
bracelets, or other metal objects to touch the
nsde of the machne, as ths may result n burns or
electrcal shock.
If you tear the paper, remove any torn peces to
avod further jams.
If loose toner comes nto contact wth your skn or
clothng, wash wth cold water. Warm water wll set
the toner.
Do not force a jammed document or paper out of
the machne. Contact Canon Customer Care Center f
needed.
–
–
–
–