manualshive.com logo in svg

Canon Laser Class 810, Basic Operation Manual

Share
Download
Canon Laser Class 810 Basic Operation Manual Download Page 249

9-19

System Manager Sett

ngs

Accepting Print Jobs with Unknown IDs

You can specfy whether to accept or reject prnt jobs from computers that do not 
correspond wth a regstered Department ID.

1

 

Press [Additional Functions].

2

 

Press [

] or [

] to select <SYSTEM SETTINGS>, then press [OK].

If the System Manager ID and System Password have been set, enter the System Manager ID and System 
Password usng the numerc keys, then press [Log In/Out (ID)].

3

 

Press [

] or [

] to select <MANAGE DEPT. ID>, then press [OK].

4

 

Press [

] or [

] to select <ON>, then press [OK].

5

 

Press [

] or [

] to select <PDL JOBS W/OUT ID>, then press [OK].

6

 

Press [

] or [

] to select <ON> or <OFF>, then press [OK].

<ON>:   The machne accepts prnt jobs from computers that do not correspond wth a regstered 

Department ID.

<OFF>:   The machne does not accept prnt jobs from computers that do not correspond wth a 

regstered Department ID.

7

 

Press [Stop] to return to the standby mode.

Summary of Contents for Laser Class 810





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands