manualshive.com logo in svg

Canon Laser Class 810, Basic Operation Manual

Share
Download
Canon Laser Class 810 Basic Operation Manual Download Page 209

5-25

Rece

vng Documents

Printing Received Documents

The machine provides the following printing features: two-sided printing and 
received image reduction.

Two-Sided Printing

You can prnt receved documents on both sdes of the paper.

You can prnt the receved documents on both sdes of the paper only when <PAPER SIZE> s set to <LTR>, 
<LGL>, or <A4>. The receved documents are prnted on one sde of the paper when <PAPER SIZE> s not set to 
<LTR>, <LGL>, or <A4>. (See “Settng Paper Sze and Type,” on p. 2-12.)

1

 

Press [Additional Functions].

2

 

Press [

] or [

] to select <TX/RX SETTINGS>, then press [OK].

3

 

Press [

] or [

] to select <TX/RX COMMON SET.>, then press [OK].

4

 

Press [

] or [

] to select <RX SETTINGS>, then press [OK].

5

 

Press [

] or [

] to select <TWO-SIDED PRINT>, then press [OK].

Summary of Contents for Laser Class 810





























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands